MACHINE FEATURES:
a. Ruggedly constructed cast-iron machine frame features maximum rigidity and stability.
b. Powered table rollers.
c. Anti-Kickback design for safety.
d. Cast-iron table is precision ground.
e. Flat cutterhead is standard.
f. 6'' dust hood outlet.
g. Cast-iron base.
MODEL: |
CM-508Y |
CM-609Y |
Table area |
900 X 540 mm |
900 x 640 mm |
Max. planing width |
508 mm |
609 mm |
Max. planing thickness |
230 mm |
230 mm |
Min. planing thickness |
3 mm |
3 mm |
Min. planing length |
254 mm |
254 mm |
Cutterhead diameter |
120 mm |
120 mm |
Cutterhead speed |
5000 R.P.M. |
5000 R.P.M |
Blade quantity |
4 pcs |
4 pcs |
Feeding speed |
6-10 m/min |
6-10 m/min |
Table vertical motor |
1/2 HP |
1/2 HP |
Dust outlet |
6'' |
6'' |
Feeding motor |
1 HP |
1 HP |
Motor |
7.5 HP |
7.5 HP |
**Specifications may be changed or modified without notice.
FLAT KNIFE CUTTERHEAD
* The cutterhead is fitted with 4 high speed steel knives.
* ø110mm diameter cutterhead is balanced dynamically and precision ground.
POWERED TABLE ROLLERS
* The two table-rollers are powered to ensure smooth feeding even feeding a moisturized wood.
SYNCHRONOUSLY ADJUSTED TABLE ROLLERS
* The height of two table-rollers are synchronously adjusted by shufting a quick seyying lever for added convenience.
VARIABLE FEED SPEED
*The feed speed is changed by variable speed pulley device.
* Feed speed range 6-10m/min.
FEED DRIVE SYSTEM
* The feed drive system consists of a motor, variable speed pulley and chain, providing variable feed speed.
MICROMETRICAL ADJUSTMENT FOR TABLE ELEVATION
* The table elevation is power operated for convenience.
* A manual micrometer adjustment knob is mounted on stop of the machine for accurate adjustment.
CENTRALIZED CONTROL PANEL
* All motion controls are centralized on a control panel for convenient operation.
* Digital position control for table elevation (OPTION).
* Jog control for table raising and lowering,
* Feed control.
SPIRAL CUTTERHEAD
The spiral cutterhead is fitted with four-edge tungsten carbide knife inserts.
Knife insert sizes 14 x 14 x2 mm.
SPIRAL CUTTERHEAD
Ideal for heavy cutting.
The spiral cutterhead is fitted with two-edge tungsten carbide knife inserts.
Knife insert sizes 30 x 12 x 1.5 mm.
DIGITAL POSITION CONTROLLER
DIGITAL READOUT
FEEDING INVERTER