MACHINE FEATURES:
a. A heavy duty planer.
b. Ruggely constructed cast-iron machine frame features maximum rigidity and stability.
c. Powered table elevation.
d. Variable feed speed 7-30m/min.
e. Anti-Kickback design for safety.
f. Cast-iron table is precision ground.
g. Flat cutterhead is standard.
h. Dust outlet 6''.
i. Cast-iron base.
MODEL: |
CM-624 |
CM-626 |
Table area |
900 X 640 mm |
900 x 690 mm |
Max. planing width |
609 mm |
660 mm |
Max. planing thickness |
300 mm |
300 mm |
Min. planing thickness |
4 mm |
4 mm |
Min. planing length |
263 mm |
263 mm |
Cutterhead diameter |
120 m |
120 mm |
Cutterhead speed |
5000 R.P.M |
5000 R.P.M |
Blade quantity |
4 pcs |
4 pcs |
Feeding speed |
7-30 m/min |
7-30 m/min |
Table vertical motor |
1/2 HP |
1/2 HP |
Dust outlet |
6'' |
6'' |
Feeding motor |
2 HP |
2 HP |
Motor |
10 HP |
15 HP |
**Specifications may be changed or modified without notice.
FLAT KINFE CUTTERHEAD
* The cutterhead is fitted with 4 high speed steel knives.
* ø110mm diameter cutterhead is balanced dynamically and precision ground.
SECTIONAL INFEED ROLLER
* The sectional infeed roller allows for feeding several pieces of wood with varying thickness. (Flexible roller w/spring type)
POWERED TABLE ROLLERS
* The two table-rollers are powered to ensure smooth feeding even when feeding moisturized wood.
* The height of two-rollers are adjusted independently.
CENTRALIZED CONTROL PANEL
* All motion controls are centralized on a control panel for convenient operation.
* Digital position control for table elevation (OPTION).
* Jog control for table raising and lowering.
* Feed control.
* Cutterhead running control.
MICROMETRICAL TABLE ELEVATION ADJUSTMENT KNOB
* Allows for the manual micrometer adjustment of table raising and lowering.
* Feed speed adjustment knob provides convenient adjustment for feed which is indicated on a speedometer.
VARIABLE FEED SPEED
* The feed speed is changed by a variable speed pulley device.
* Feed speed range 7-30 m/min.
FEED DRIVE SYSTEM
* The feed drive system consists of a motor, variable speed pulley and chain, providing variable feed speed.
SPIRAL CUTTERHEAD
The spiral cutterhead is fitted with four-edge tungsten carbide knife inserts.
Knife insert sizes 14 x 14 x2 mm.
SPIRAL CUTTERHEAD
Ideal for heavy cutting.
The spiral cutterhead is fitted with two-edge tungsten carbide knife inserts.
Knife insert sizes 30 x 12 x 1.5 mm.
DIGITAL POSITION CONTROLLER